Universal Broadband Router Hardware Installation Guide

Index
IN-5
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
specifications A-2
surge suppression 2-8
troubleshooting 4-2
DC power connection location
chassis terminal blocks (figure) 3-31, 5-11, 5-16
differences between the Cisco uBR10012 router and other
Cisco CMTS platforms
1-48
digital signal level meter manufacturers D-2, D-4
diplex filter manufacturers D-1, D-3
duplex
SC-Type cable and connector (figure) 1-47, B-9
E
electromagnetic interference shielding 2-2
electromagnetic pulse, see EMP
EMI
predict and remedy 2-8
shielding 2-2
EMP 2-8
enabled LEDs
function 4-6
troubleshooting 4-12
environmental specifications 2-6
ESD
prevention guidelines 2-2
wrist strap 2-2, 5-65
Ethernet
1000Base-LX/LH 1-38
1000Base-SX 1-37
1000Base-ZX 1-38
10BASE-T 3-52
cable requirements 3-52
connecting on the PRE module 3-54
connections 2-9
connection to 10BASE-T 3-52
Fast Ethernet 100BASE-T 3-53
hub 3-52
LAN connections 3-53
PRE port 1-18
slot numbering for active PRE port 1-12
specifying the connector type 3-64
straight-through cable 3-53
troubleshooting connections 4-4
ethernet and fast ethernet maximum transmission distances
(table)
2-9
external clock reference source 1-26, 1-36
F
faceplate
Cisco OC-12 POS (figure) 1-41
Cisco TCC+ card (figure) 1-26
Cisco uBR10-LCP2-MC28C (figure) 1-33
Gigabit Ethernet (figure) 1-38
gigabit Ethernet (figure) 1-37
PRE1 module (figure) 1-17
PRE2 module (figure) 1-17, 1-18
fan assembly module
airflow 2-6
airflow cautions 3-3
cable (figure) 1-14
description 1-48
LED’s (table) 1-13
module (figure) 1-13
multiple or single fan failure 4-4
preventing overheating 3-3
product order number for spare 5-6
reinstalling 3-34
removing 3-9
replacing 5-6
troubleshooting 4-2, 4-11, 5-7
Fast Ethernet
100BASE-T connection 3-53
cable requirements 3-53
cables B-4
connections 2-9
pinouts B-4