Universal Broadband Router Hardware Installation Guide

IN-1
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
INDEX
Numerics
1000Base-LX/LH 1-38, A-6
1000BASE-SX A-6
1000Base-SX 1-37, A-6
1000Base-ZX 1-38, A-6
10BASE-T RJ-45 connector pinouts (table) B-6
A
AC-input power shelf
installation 3-3
installing after installing the main chassis 3-23
AC PEM
description 1-22, 5-21
faceplate (figure) 1-23
LEDs (table) 1-23
standby position and AC plug location (figure) 3-36
AC power cord, on/off switch locations (figure) 3-8
acronyms, list of 1-xix
adapter card
removing (figure) 5-67
air filter
air filter (figure) 5-6
in the front cover (figure) 5-6
product order number for spare 5-5
replacing 5-5
airflow
blank cover for empty TCC+ card slot 5-37
blank slot covers 5-42, 5-43, 5-62
cautions 3-3
chassis clearance 2-5
diagram 2-6
specifications A-1
alarm cutoff switch, PRE module 1-19
alarm indicators
connecting 3-31, 5-18
connectors (figure) 3-33
description 3-31, 5-18
normally closed terminals 5-19
normally open terminals 5-19
alarm terminal block 5-19
connections (figure) 3-33, 5-20
altitude, specifications A-1
analog television
chrominance subcarrier frequencies (table) C-2
system baseband video parameters (table) C-2
system RF parameters (table) C-2
attaching ground wire to ground lug (figure) 3-27
attenuator manufacturers D-1, D-3
auxiliary port
DB-25 adapter, signaling and cabling (table) B-4
auxiliary port, PRE1 module
cables B-4
configuring the attached modem 3-51
pinouts B-4
RJ-45 connections (figure) 3-51
auxiliary port, PRE module 1-18
connecting 3-49
B
blower module, See fan assembly module
boot loader 1-5
bracket location, Cisco uBR10012 chassis
flush front-mounting (figure) 3-18