Universal Broadband Router Hardware Installation Guide

B-8
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Appendix B Cable Specifications
Fiber-Optic Cables and Connectors
Figure B-8 Installing Cable in an RJ45 Connector
Fiber-Optic Cables and Connectors
The following warnings apply when you work with fiber-optic cables and ports.
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
Warning Laser radiation is present when the system is open and interlocks are bypassed. Statement 1009
Warning Class 1 laser product Statement 1008
Warning Class 1 LED product Statement 1027
Use a single-mode or multimode fiber-optic interface cable to connect your Cisco uBR10012 router to
another router or switch.
In general, multimode cables are gray or orange, and single-mode cables are yellow.
Note Single-mode and multimode fiber-optic cables are not available from Cisco Systems, Inc.
127878
1
3
2
4
1 Jacket cut here 3 RJ45 connector
2 Wire cut to one half inch in length 4 Cable installed in RJ45 connector