Universal Broadband Router Hardware Installation Guide

A-1
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
APPENDIX
A
Technical Specifications
This appendix provides specifications information about the Cisco uBR10012 router, router
components, and cards used in the router.
• Cisco uBR10012 Chassis and Chassis Components, page A-1
• Network Uplink Cards and Cable Interface Line Cards, page A-6
Cisco uBR10012 Chassis and Chassis Components
Table A-1 lists the physical specifications for the Cisco uBR10012 universal broadband router and its
components.
Ta b l e A-1 Cisco uBR10012 Router and Router Components Physical Specifications
Description Specifications
Chassis specifications • Weight: 235 lb (106.6 kg) fully configured chassis
• Height: 31.25 in. (79.4 cm)—18 Rack Units (RU)
• Width: 17.2 in. (43.7 cm)
• Depth: 22.75 in. (57.8 cm)
• Mounting: 19 in. rack mountable (front or rear),
2 units per 7 ft. rack
Note Mounting in 23 in. racks is possible with optional third-party hardware.
Temperature range • Operating: 41 to 104° F (5 to 40° C)
• Storage: −40 to 158° F (−40 to 70° C)
Relative humidity • Operating—nominal: 5 to 85 percent
• Storage: 5 to 95 percent
Operating altitude –197 to 13,123 ft. (–60 to 4000 m)
Airflow 280 cfm
1
(approximately) through the system fan assembly module (low speed, normal
operating temperatures, with clean air filter)
450 cfm (approximately) through the system fan assembly module (high speed, chassis
temperature at air outlet exceeds 40° C, with clean air filter)
Operating vibrations 5 to 200 Hz, 1 g (1 octave/min), 200 to 500 Hz, 2 g (1 octave/min)
Chassis power consumption Not to exceed 2400 W
2
(8189btu
3
)