Universal Broadband Router Hardware Installation Guide

xii
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Preface
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030.
Document Organization
This publication is organized as follows:
Related Documentation
The following is a list of documents and URLs for the Cisco uBR10012 router:
• Cisco uBR10012 Universal Broadband Router Software Configuration Guide
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/configuration/guide/scg.html
• Regulatory Compliance and Safety Information for the Cisco uBR10012 Universal Broadband
Router
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/regulatory/compliance/ub10rcsi.html
Chapter Title Description
Chapter 1 Cisco uBR10012 Universal
Broadband Router Overview
Describes the physical properties of the
Cisco
uBR10012 components and a functional
overview of the system.
Chapter 2 Preparing for Installation Describes safety considerations, tools required, site
requirements, and procedures you should perform
before the installation.
Chapter 3 Installing the
Cisco uBR10012 Router
Provides information for installing the router hardware,
connecting system cables, initial system startup, and
verifying system operation.
Chapter 4 Troubleshooting the
Installation
Provides basic troubleshooting procedures for the
hardware installation.
Chapter 5 Maintaining the
Cisco uBR10012 Router
Describes the procedures required to perform routine
maintenance and to remove and replace field
replaceable units (FRUs) in the Cisco
uBR10012 router.
Appendix A Technical Specifications Contains the electrical and physical specifications for
the Cisco
uBR10012 router.
Appendix B Cable Specifications Provides cabling information and pinout information
for the router.
Appendix C Frequency Allocation Provides the standard frequency allocation channel
plans for cable networks.
Appendix D Manufacturers for Headend
Provisioning Requirements
Lists vendors for the auxiliary equipment that is
normally required for a headend installation.