Universal Broadband Router Hardware Installation Guide

3-34

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

OL-18259-01

Chapter 3 Installing the Cisco uBR10012 Router

Reinstalling the Modules

Reinstall all the components that were removed from the chassis.

Recommended Tools and Supplies

Table 3-5 lists the tools and supplies that you need to reinstall the components in the chassis.

Reinstalling the Fan Assembly Module

Step 1 Using two hands, pick up the fan assembly module.

Caution The fan assembly module weighs approximately 30 lbs (13.61 kg)

Step 2 Align the module with the slot in the chassis.

Step 3 Push the fan module back firmly into the chassis, making sure that the module securely connects to the

backplane. See

Figure 3-26.

Step 4 Tighten the captive screws on each side of the fan assembly module.

Figure 3-26 Replacing the Fan Assembly

Ta b l e 3-5 Tools and Supplies for Installing Components in the Chassis

Quantity Description Comments

1 Number 2 Phillips screwdriver —

— ESD-preventive wrist strap —

103483

CISCO

10000

CISCO