Universal Broadband Router Hardware Installation Guide

xi
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Preface
This section describes the purpose, audience, organization, and conventions used in this guide. This
section also provides a revision history and a list of related documents as well as instructions for
obtaining technical assistance and additional information.
Revision History
Purpose
This installation guide explains the initial hardware installation and basic configuration procedures for
the Cisco
uBR10012 universal broadband router. It contains procedures for installing the router
hardware, creating a basic software configuration file, and starting up the router. After you complete the
installation and basic configuration procedures covered in this guide, use the appropriate companion
publications to more completely configure your system. See the documents listed in the
“Related
Documentation” section on page xii.
Audience
To use this publication, you should be familiar not only with Cisco router hardware and cabling, but also
with electronic circuitry and wiring practices. You should be able to perform basic network configuration
procedures, and preferably have experience as an electronic or electromechanical technician.
Date Revision Reason
12/15/2008 OL-18259-01 Updated with PRE4 information. Moved the document to online
only.
04/05/2006 78-11450-03
Rev.B0
Updated Table 3-6.
06/28/2005 OL-5000-03 Added HHGE line card information.
10/18/2004 OL-5000-02 Updated with PRE2 information.
12/20/2003 OL-5000-01 Moved document to online only, updated format, added AC PEM
specifications, and corrected PEM information, corrected PRE
information, revised line card installation procedure.
03/20/2001 78-11450-03 Original publication and updates.