Universal Broadband Router Hardware Installation Guide

3-25
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Chapter 3 Installing the Cisco uBR10012 Router
Connecting the Chassis to Ground
Figure 3-18 Attaching the Chassis to the Equipment Rack
Connecting the Chassis to Ground
Connecting the Cisco uBR10012 router chassis to earth ground is required for all DC powered
installations. Have the recommended tools and supplies available before you begin this procedure (see
Table 3-2).
Warning The importance of proper grounding cannot be overemphasized. It will minimize the potential for
damage to your system and maximize safety at the system site. We recommend you consult a licensed
electrician or your local electric utility company if you have any questions. Statement 269
Warning When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046
72315
Rear
mounting
brackets
Mounting
brackets