User's Manual

CHAPTER 7
Managing User Accounts
This chapter includes the following sections:
•
Configuring Local Users, page 65
•
Configuring Active Directory, page 66
•
Viewing User Sessions, page 71
•
Terminating a User Session, page 71
Configuring Local Users
Before You Begin
You must log in as a user with admin privileges to configure or modify local user accounts.
Procedure
PurposeCommand or Action
Enters user command mode for user number usernumber.Server# scope user usernumber
Step 1
Enables or disables the user account on the CIMC.Server /user # set enabled {yes
| no}
Step 2
Specifies the username for the user.Server /user # set name
username
Step 3
You are prompted to enter the password twice.Server /user # set password
Step 4
Specifies the role assigned to the user. The roles are as
follows:
Server /user # set role {readonly
| user | admin}
Step 5
• readonly—This user can view information but cannot
make any changes.
• user—This user can do the following:
•
View all information
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 65