User's Manual

PurposeCommand or Action
•
Username and password to connect to the server
This example shows how to create a CIFS network mounted vMedia mapping:
Server # scope vmedia
Server /vmedia # map-cifs sample-volume //10.10.10.10/project /test/sample
Server username:
Server password: ****
Confirm password: ****
Server /vmedia #
Viewing Network Mount vMedia Mapping Properties
Before You Begin
You must log in with admin privileges to perform this task.
Procedure
PurposeCommand or Action
Enters the virtual media command mode.Server # scope vmedia
Step 1
Displays information on all the vmedia mapping
that are configured.
Server /vmedia # show mappings detail
Step 2
This example shows how to view the properties of all the configured vmedia mapping:
Server # scope vmedia
Server /vmedia # show mappings
Volume Map-status Drive-type remote-share remote-file mount-type
------ ---------- ------------ --------------------- ------------------- -----------
Huu OK removable http://10.104.236.99/ rhel-server-6.1-x86_6.iso www
Rhel OK CD http://10.104.236.99/ rhel-server-6.1-x86_6.iso www
Removing Network Mounted vMedia Mapping
Before You Begin
You must log in with admin privileges to perform this task.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
60 OL-28893-01
Managing Remote Presence
Viewing Network Mount vMedia Mapping Properties