User's Manual

Enabling the Virtual KVM
Before You Begin
You must log in as a user with admin privileges to enable the virtual KVM.
Procedure
PurposeCommand or Action
Enters KVM command mode.Server# scope kvm
Step 1
Enables the virtual KVM.Server /kvm # set enabled yes
Step 2
Commits the transaction to the system
configuration.
Server /kvm # commit
Step 3
(Optional) Displays the virtual KVM
configuration.
Server /kvm # show [detail]
Step 4
This example enables the virtual KVM:
Server# scope kvm
Server /kvm # set enabled yes
Server /kvm *# commit
Server /kvm # show
Encryption Enabled Local Video Active Sessions Enabled KVM Port
------------------ ---------------- --------------- ------- --------
no yes 0 yes 2068
Server /kvm #
Disabling the Virtual KVM
Before You Begin
You must log in as a user with admin privileges to disable the virtual KVM.
Procedure
PurposeCommand or Action
Enters KVM command mode.Server# scope kvm
Step 1
Disables the virtual KVM.Server /kvm # set enabled no
Step 2
Disabling the virtual KVM disables access to
the virtual media feature, but does not detach
the virtual media devices if virtual media is
enabled.
Note
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
56 OL-28893-01
Managing Remote Presence
Enabling the Virtual KVM