User's Manual

DescriptionName
The current LED color, if any.
To make the physical LED on the storage device blink, select Turn On
from the drop-down list. To let the storage device control whether the
LED blinks, select Turn Off.
This information is only available for some C-Series
servers.
Note
LED Status column
This example displays storage sensor information:
Server# scope chassis
Server /chassis # show hdd
Name Status
-------------------- --------------------
HDD_01_STATUS present
HDD_02_STATUS present
HDD_03_STATUS present
HDD_04_STATUS present
Server /chassis #
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 53
Viewing Server Sensors
Viewing Storage Sensors