User's Manual

Procedure
PurposeCommand or Action
Enters the chassis command mode.Server# scope chassis
Step 1
Displays installed storage cards.Server /chassis # show storageadapter
[slot] [detail]
Step 2
This command displays all MegaRAID
controllers on the server that can be
managed through CIMC. If an installed
controller or storage device is not
displayed, then it cannot be managed
through CIMC.
Note
Enters command mode for an installed storage
card.
Server /chassis # scope storageadapter slot
Step 3
Displays battery backup unit information for the
storage card.
Server /chassis/storageadapter # show bbu
[detail]
Step 4
Displays RAID levels supported by the storage
card.
Server /chassis/storageadapter # show
capabilites [detail]
Step 5
Displays number of errors seen by the storage
card.
Server /chassis/storageadapter # show
error-counters [detail]
Step 6
Displays firmware version information for the
storage card.
Server /chassis/storageadapter # show
firmware-versions [detail]
Step 7
Displays hardware information for the storage
card.
Server /chassis/storageadapter # show
hw-config [detail]
Step 8
Displays manufacturer data for the storage card.Server /chassis/storageadapter # show
mfg-data [detail]
Step 9
Displays adapter PCI information for the storage
card.
Server /chassis/storageadapter # show
pci-info [detail]
Step 10
Displays running firmware information for the
storage card.
Server /chassis/storageadapter # show
running-firmware-images [detail]
Step 11
Displays adapter firmware settings for the storage
card.
Server /chassis/storageadapter # show
settings [detail]
Step 12
Displays firmware images to be activated on
startup for the storage card.
Server /chassis/storageadapter # show
startup-firmware-images [detail]
Step 13
This example displays storage properties:
Server# scope chassis
Server /chassis # show storageadapter
PCI Slot Product Name Serial Number Firmware Package Build
-------- ---------------------------------- -------------- -------------------------
SAS LSI MegaRAID SAS 9260-8i SV93404392 12.12.0-0038
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 41
Viewing Server Properties
Viewing Storage Adapter Properties