User's Manual

Viewing Memory Properties
Before You Begin
The server must be powered on, or the properties will not display.
Procedure
PurposeCommand or Action
Enters chassis command mode.Server# scope chassis
Step 1
Displays memory properties.Server /chassis # show dimm [detail]
Step 2
Displays DIMM summary information.Server /chassis # show dimm-summary
Step 3
This example displays memory properties:
Server# scope chassis
Server /chassis # show dimm
Name Capacity Channel Speed (MHz) Channel Type
-------------------- --------------- ------------------- ---------------
DIMM_A1 2048 MB 1067 Other
DIMM_A2 2048 MB 1067 Other
DIMM_B1 2048 MB 1067 Other
DIMM_B2 2048 MB 1067 Other
DIMM_C1 Not Installed Unknown Other
DIMM_C2 Not Installed Unknown Other
DIMM_D1 2048 MB 1067 Other
DIMM_D2 2048 MB 1067 Other
DIMM_E1 2048 MB 1067 Other
DIMM_E2 2048 MB 1067 Other
DIMM_F1 Not Installed Unknown Other
DIMM_F2 Not Installed Unknown Other
Server /chassis #
This example displays detailed information about memory properties:
Server# scope chassis
Server /chassis # show dimm detail
Name DIMM_A1:
Capacity: 2048 MB
Channel Speed (MHz): 1067
Channel Type: Other
Memory Type Detail: Synchronous
Bank Locator: NODE 0 CHANNEL 0 DIMM 0
Visibility: Yes
Operability: Operable
Manufacturer: 0x802C
Part Number: 18JSF25672PY-1G1D1
Serial Number: 0xDA415F3F
Asset Tag: Unknown
Data Width: 64 bits
Name DIMM_A2:
Capacity: 2048 MB
--More--
Server /chassis #
This example displays DIMM summary information:
Server# scope chassis
Server /chassis # show dimm-summary
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 39
Viewing Server Properties
Viewing Memory Properties