User's Manual

Server#
Viewing CIMC Properties
CIMC gets the current date and time from the server BIOS. To change this information, reboot the server
and press F2 when prompted to access the BIOS configuration menu. Then change the date or time using
the options on the main BIOS configuration tab.
Note
Procedure
PurposeCommand or Action
Displays CIMC properties.Server# show cimc [detail]
Step 1
This example displays CIMC properties:
Server# show cimc detail
CIMC:
Firmware Version: 1.4(2.18)
Current Time: Wed Jan 11 07:01:50 2012
Boot-loader Version: 1.4(2.18).16
Server#
Viewing CPU Properties
Before You Begin
The server must be powered on, or the properties will not display.
Procedure
PurposeCommand or Action
Enters chassis command mode.Server# scope chassis
Step 1
Displays CPU properties.Server /chassis # show cpu [detail]
Step 2
This example displays CPU properties:
Server# scope chassis
Server /chassis # show cpu
Name Cores Version
------------ -------- --------------------------------------------------
CPU1 4 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
CPU2 4 Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
Server /chassis #
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
38 OL-28893-01
Viewing Server Properties
Viewing CIMC Properties