User's Manual

CHAPTER 3
Managing the Server
This chapter includes the following sections:
•
Toggling the Locator LED, page 13
•
Toggling the Locator LED for a Hard Drive, page 14
•
Managing the Server Boot Order, page 14
•
Resetting the Server, page 16
•
Shutting Down the Server, page 17
•
Managing Server Power, page 18
•
Configuring Power Policies, page 20
•
Managing the Flexible Flash Controller, page 24
•
Configuring BIOS Settings, page 30
Toggling the Locator LED
Before You Begin
You must log in with user or admin privileges to perform this task.
Procedure
PurposeCommand or Action
Enters chassis command mode.Server # scope chassis
Step 1
Enables or disables the chassis locator LED.Server /chassis # set locator-led {on | off}
Step 2
Commits the transaction to the system
configuration.
Server /chassis # commit
Step 3
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 13