User's Manual

DescriptionName
The sparing mode used by the CIMC. This can be one of the
following:
• —The spared memory is allocated at the rank level.
• DIMM Sparing—The spared memory is allocated at the
DIMM level.
This option is used only if is set to
Sparing.
Note
Sparing Mode
Mirroring is supported across Integrated Memory Controllers
(IMCs) where one memory riser is mirrored with another. This
can be one of the following:
• Intersocket—Each IMC is mirrored across two sockets.
• Intrasocket—One IMC is mirrored with another IMC in
the same socket.
This option is used only if is set to
Mirroring.
Note
Mirroring Mode
Whether the system actively searches for, and corrects, single
bit memory errors even in unused portions of the memory on
the server. This can be one of the following:
• Disabled—The system checks for memory ECC errors
only when the CPU reads or writes a memory address.
• Enabled—The system periodically reads and writes
memory searching for ECC errors. If any errors are found,
the system attempts to fix them. This option may correct
single bit errors before they become multi-bit errors, but
it may adversely affect performance when the patrol scrub
is running.
Patrol Scrub
Controls the time interval between each patrol scrub memory
access. A lower interval scrubs the memory more often but
requires more memory bandwidth.
Select a value between 5 and 23. The default value is 8.
This option is used only if Patrol Scrub is
enabled.
Note
Patrol Scrub Interval
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 259
BIOS Parameters by Server Model
Advanced BIOS Parameters for C460 Servers