User's Manual

DescriptionName
What type of character formatting is used for console redirection. This
can be one of the following:
• PC-ANSI—The PC-ANSI terminal font is used.
• VT100—A supported vt100 video terminal and its character set
are used.
• VT100+—A supported vt100-plus video terminal and its character
set are used.
• VT-UTF8—A video terminal with the UTF-8 character set is
used.
This setting must match the setting on the remote terminal
application.
Note
Terminal Type
What BAUD rate is used for the serial port transmission speed. If you
disable Console Redirection, this option is not available. This can be
one of the following:
• 9600—A 9,600 BAUD rate is used.
• 19200—A 19,200 BAUD rate is used.
• 38400—A 38,400 BAUD rate is used.
• 57600—A 57,600 BAUD rate is used.
• 115200—A 115,200 BAUD rate is used.
This setting must match the setting on the remote terminal
application.
Note
Bits per second
Whether a handshake protocol is used for flow control. Request to Send
/ Clear to Send (RTS/CTS) helps to reduce frame collisions that can be
introduced by a hidden terminal problem. This can be one of the
following:
• None—No flow control is used.
• —RTS/CTS is used for flow control.
This setting must match the setting on the remote terminal
application.
Note
Flow Control
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
248 OL-28893-01
BIOS Parameters by Server Model
Advanced BIOS Parameters for C420 Servers