User's Manual

DescriptionName
Controls the time interval between each patrol scrub memory
access. A lower interval scrubs the memory more often but
requires more memory bandwidth.
Select a value between 5 and 23. The default value is 8.
This option is used only if Patrol Scrub is
enabled.
Note
Patrol Scrub Interval
Controls the DIMM power savings mode policy. This can be
one of the following:
• Disabled—DIMMs do not enter power saving mode.
• Slow—DIMMs can enter power saving mode, but the
requirements are higher. Therefore, DIMMs enter power
saving mode less frequently.
• Fast—DIMMs enter power saving mode as often as
possible.
• Auto—The BIOS controls when a DIMM enters power
saving mode based on the DIMM configuration.
CKE Low Policy
Serial Port Configuration Parameters
DescriptionName
Whether serial port A is enabled or disabled. This can be one of the
following:
• Disabled—The serial port is disabled.
• Enabled—The serial port is enabled.
Serial A Enable
USB Configuration Parameters
DescriptionName
Whether the server can boot from a USB device. This can be one of the
following:
• Disabled—The server can boot from a USB device.
• Enabled—The server cannot boot from a USB device.
Make Device Non-Bootable
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 229
BIOS Parameters by Server Model
Advanced BIOS Parameters for C260 Servers