User's Manual

PurposeCommand or Action
Commits the transaction to the system
configuration.
Server /fault # commit
Step 3
(Optional) Displays the platform event alert
configuration.
Server /fault # show [detail]
Step 4
The following example enables platform event alerts:
Server# scope fault
Server /fault # set platform-event-enabled yes
Server /fault *# commit
Server /fault # show
SNMP Community String Platform Event Enabled
--------------------- -----------------------
public yes
Server /fault #
Disabling Platform Event Alerts
Procedure
PurposeCommand or Action
Enters the fault command mode.Server# scope fault
Step 1
Disables platform event alerts.Server /fault # set
platform-event-enabled no
Step 2
Commits the transaction to the system
configuration.
Server /fault # commit
Step 3
(Optional) Displays the platform event alert
configuration.
Server /fault # show [detail]
Step 4
The following example disables platform event alerts:
Server# scope fault
Server /fault # set platform-event-enabled no
Server /fault *# commit
Server /fault # show
SNMP Community String Platform Event Enabled
--------------------- -----------------------
public no
Server /fault #
Configuring Platform Event Filters
You can configure actions and alerts for the following platform event filters:
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
150 OL-28893-01
Configuring Platform Event Filters
Disabling Platform Event Alerts