User's Manual

PurposeCommand or Action
The server must be powered on before you can
view or change adapter settings.
Note
Starts the import operation. The adapter downloads the
configuration file from the specified path on the TFTP server
Server /chassis/adapter #
import-vnic tftp-ip-address
path-and-filename
Step 3
at the specified IP address. The configuration will be
installed during the next server reboot.
This example imports a configuration for the adapter in PCI slot 1:
Server# scope chassis
Server /chassis # scope adapter 1
Server /chassis/adapter # import-vnic 192.0.2.34 /ucs/backups/adapter4.xml
Import succeeded.
New VNIC adapter settings will take effect upon the next server reset.
Server /chassis/adapter #
What to Do Next
Reboot the server to apply the imported configuration.
Restoring Adapter Defaults
Before You Begin
You must log in with admin privileges to perform this task.
Procedure
PurposeCommand or Action
Enters the chassis command mode.Server# scope chassis
Step 1
Restores factory default settings for the adapter at
the PCI slot number specified by the index
argument.
Server /chassis #
adapter-reset-defaults index
Step 2
This example restores the default configuration of the adapter in PCI slot 1:
Server# scope chassis
Server /chassis # adapter-reset-defaults 1
This operation will reset the adapter to factory default.
All your configuration will be lost.
Continue?[y|N] y
Server /chassis #
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 129
Managing Network Adapters
Restoring Adapter Defaults