User's Manual

Viewing Storage Controller Logs
Before You Begin
You must log in with admin privileges to perform this task.
Procedure
PurposeCommand or Action
Enters the chassis command mode.Server# scope chassis
Step 1
Enters command mode for an installed storage
card.
Server /chassis # scope storageadapter slot
Step 2
Displays the storage controller logs.Server /chassis/storageadapter # show log
Step 3
This example shows how to display storage controller logs:
Server # scope chassis
Server /chassis # scope storageadapter SLOT-3
Server /chassis/storageadapter # show log
Time Severity Description
---- -------- -------------
Fri March 1 09:52:19 2013 Warning Predictive Failure
Fri March 1 07:50:19 2013 Info Battery charge complete
Fri March 1 07:50:19 2013 Info Battery charge started
Fri March 1 07:48:19 2013 Info Battery relearn complete
Fri March 1 07:47:19 2013 Info Battery is discharging
Fri March 1 07:45:19 2013 Info Battery relearn started
Server /chassis/storageadapter #
Backing Up and Restoring the Adapter Configuration
Exporting the Adapter Configuration
The adapter configuration can be exported as an XML file to a TFTP server.
If any firmware or BIOS updates are in progress, do not export the adapter configuration until those tasks
are complete.
Important
Before You Begin
A supported Virtual Interface Card (VIC) must be installed in the chassis and the server must be powered on.
Obtain the TFTP server IP address.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 127
Managing Network Adapters
Viewing Storage Controller Logs