User's Manual

PurposeCommand or Action
Enables or disables TCP/IPv6 RSS. The default is
enable.
Server /chassis/adapter/host-eth-if/rss #
set rss-hash-tcp-ipv6 {disable |
enable}
Step 47
Enables or disables IPv6 Extension RSS. The default
is disable.
Server /chassis/adapter/host-eth-if/rss #
set rss-hash-ipv6-ex {disable | enable}
Step 48
Enables or disables TCP/IPv6 Extension RSS. The
default is disable.
Server /chassis/adapter/host-eth-if/rss #
set rss-hash-tcp-ipv6-ex {disable |
enable}
Step 49
Exits to the host Ethernet interface command mode.Server /chassis/adapter/host-eth-if/rss #
exit
Step 50
Commits the transaction to the system configuration.Server /chassis/adapter/host-eth-if #
commit
Step 51
The changes will take effect upon the next
server reboot.
Note
This example configures the properties of a vNIC:
Server# scope chassis
Server /chassis # show adapter
PCI Slot Product Name Serial Number Product ID Vendor
-------- -------------- -------------- -------------- --------------------
1 UCS VIC P81E QCI1417A0QK N2XX-ACPCI01 Cisco Systems Inc
Server /chassis # scope adapter 1
Server /chassis/adapter # scope host-eth-if Test1
Server /chassis/adapter/host-eth-if # set uplink 1
Server /chassis/adapter/host-eth-if *# scope offload
Server /chassis/adapter/host-eth-if/offload *# set tcp-segment-offload enable
Server /chassis/adapter/host-eth-if/offload *# exit
Server /chassis/adapter/host-eth-if *# commit
Server /chassis/adapter/host-eth-if #
What to Do Next
Reboot the server to apply the changes.
Creating a vNIC
The adapter provides two permanent vNICs. You can create up to 16 additional vNICs.
Before You Begin
You must log in with user or admin privileges to perform this task.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01 105
Managing Network Adapters
Creating a vNIC