User's Manual

ManualsBrandsCisco Systems ManualsOtherUCSCPCIEBTG

111

112

113

114

115

116

117

118

119

120

Enabling Persistent Binding

Procedure

PurposeCommand or Action

Enters the chassis command mode.Server# scope chassis

Step 1

Enters the command mode for the adapter card at

the PCI slot number specified by index.

Server /chassis # scope adapter index

Step 2

The server must be powered on before you

can view or change adapter settings.

Note

Enters the host Fibre Channel interface command

mode for the specified vHBA.

Server /chassis/adapter # scope host-fc-if

{fc0 | fc1 | name}

Step 3

Enters the persistent binding command mode for

the vHBA.

Server /chassis/adapter/host-fc-if # scope

perbi

Step 4

Enables persistent binding for the vHBA.Server /chassis/adapter/host-fc-if/perbi #

set persistent-lun-binding enable

Step 5

Commits the transaction to the system

configuration.

Server /chassis/adapter/host-fc-if/perbi #

commit

Step 6

This example enables persistent binding for a vHBA:

Server# scope chassis

Server /chassis # scope adapter 4

Server /chassis/adapter # scope host-fc-if fc1

Server /chassis/adapter/host-fc-if # scope perbi

Server /chassis/adapter/host-fc-if/perbi # set persistent-lun-binding enable

Server /chassis/adapter/host-fc-if/perbi *# commit