Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router 78-13602-01 January 2002 This document describes the Cisco uBR10-SRP-OC12SML DPT WAN line card used in the Cisco uBR10012 chassis.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Feature Overview Feature Overview The Cisco uBR10 Spatial Reuse Protocol (SRP) OC12 single-mode fiber, long reach (SML) dynamic packet transport (DPT) WAN line card provides shared IP over SONET capability for the Cisco uBR10012 router platform. The Cisco uBR10-SRP-OC12SML DPT WAN line card: • Accommodates large scale network topology. The WAN card is deployed in SONET OC-12 DPT rings.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Feature Overview Caution Make sure that you obtain the correct connector type (SC/PC) when purchasing optical attenuators. Angled SC/APC type mating surfaces can damage the Cisco uBR10-SRP-OC12SML DPT WAN line card (RX port) interface. See “Connectors and Cables” section on page 6.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Feature Overview Physical Description Figure 2 shows the Cisco uBR10-SRP-OC12SML DPT WAN line card. Figure 2 Cisco uBR10-SRP-OC12SML DPT WAN Line Card Captive screws (4) Ejector Lever CLEI code 68500 Ejector Lever The part number of the card (UBR10-SRP-OC12SML) is next to the CLEI code label.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Feature Overview Table 1 describes the LEDs on the uBR10-SRP-OC12SML DPT WAN line card. Table 1 Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs and Their Functions LED Status Description POWER Green Indicates that power is being supplied to the Cisco uBR10-SRP- OC12SML DPT WAN line card. Off Power off. Yellow Indicates that the CPU is in the bootup process, self test, or downloading code.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Connectors and Cables Connectors and Cables The Cisco uBR10-SRP-OC12SML DPT WAN line card uses a single-mode fiber-optic interface cable to connect the Cisco uBR10012 router to another router or switch. See Figure 6 on page 7. Table 2 Cable Specification Fiber Type Wavelength, nm Core Size, microns Cable Distance Single-mode fiber 1310 8 to 10 49,213 - 131,234 ft. (15 - 40 km) Single-mode cables are yellow.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Connectors and Cables Figure 6 Attaching the Attenuator and Duplex Fiber-Optic Cables to the WAN Line Card Symplex cable Attenuator Duplex cable 62703 Attenuators Cisco uBR10-SRP-OC12SML DPT WAN Line Card 78-13602-01 7
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Safety Information and Warnings Following are safety guidelines that you should follow when working with any equipment that connects to electrical power. Equipment Hazard Warning Warning This warning symbol means danger. You are in a situation that could cause bodily injury.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Attention Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à des personnels qualifiés et expérimentés. Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Avvertenza Nelle porte WAN sono presenti tensioni di rete pericolose, sia che il router sia acceso o meno (ON od OFF). Per evitare scosse elettriche, fare attenzione quando si lavora in prossimità di porte WAN. Quando si scollegano cavi, staccare per primo il connettore collegato al router.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings ¡Advertencia! Varning! Producto láser Clase I. Laserprodukt av klass 1. Taiwan version: Mainland China version: Warning Statement for Finland Varoitus Alleviates ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Äjä katso säteeseen. Warning Statement for Sweden Warning Invisible laser radiation when this component is opened and the preregulation is disabled.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Invisible Laser Radiation Warning Warning Waarschuwing Varoitus Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Safety Information and Warnings Electrical Equipment Guidelines Follow these basic guidelines when working with any electrical equipment: • Before beginning any procedures requiring access to the chassis interior, locate the emergency power-off switch for the room in which you are working. • Disconnect all power and external cables before moving a chassis. • Do not work alone when potentially hazardous conditions exist.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card Use the following procedure to install a new Cisco uBR10-SRP- OC12SML DPT WAN line card or to replace an existing line card. If two line cards are installed for redundant operation, you can remove one card and replace it without interrupting system operations.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card Removing the Line Card from the Chassis Tip Attach an ESD preventative ground strap to your wrist and to a bare metal, unpainted surface on the chassis or frame. Step 1 Face the back of the Cisco uBR10012 chassis. If necessary, clear enough interface and power cables to allow sufficient space to work.
Opening the Ejector Levers Figure 8 0 0 0 0 US 0 D LE AB EN US D LE AB EN US D LE AB EN US D LE AB EN US D LE AB EN 0 D LE AB EN US US 0 US 0 1 US US 1 US 1 US 1 US 1 US 1 US 1 US 1 2 US US 2 US 2 US 2 FA IL US 2 3 US US 2 IL US IL 2 FA US IL 2 FA US FA CISC 100 CISCO 10000 CISCO 10000 CISCO 10000 3 US 3 US 3 US 3 US 3 US 3 US 3 0 US US 0 US 0 US 0 US 0 US 0 US 0 US 0 1 US US 1 US 1 US 1 US 1 US 1 US
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card Step 5 Pull the card out of the slot and place it on an anti-static surface or in an anti-static bag (Figure 9).
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card Replacing the Cisco uBR10-SRP-OC12SML DPT WAN Line Card Step 1 Pick up the replacement Cisco uBR10-SRP- OC12SML DPT WAN line card and position it in front of the card cage slot. Step 2 Carefully align the upper and lower edges of the card with the upper and lower guides in the chassis.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card Caution Step 5 Excessive transmit signal levels at the receiver port can damage the card. Receiver input specifications are Pmin= –31 dBm, Pmax = –7 dBm. Use an optical power meter to verify that receiver signal levels are within the specifications listed (Ptyp = –29.0 dBm, Pmin = –31 dBm, Pmax = –7 dBm).
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router About Troubleshooting the Cisco uBR10-SRP-OC12SML DPT WAN Line Card About Troubleshooting the Cisco uBR10-SRP-OC12SML DPT WAN Line Card Check the following items if a problem appears on one of the OC12SML DPT WAN line cards. Step 1 Verify that the card is securely seated in the chassis • Remove the line card and reinsert it, making sure that it firmly connects to the backplane and that both captive screws are tightly connected.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Technical Specifications Technical Specifications Table 3 lists the specifications for the Cisco uBR10-SRP- OC12SML DPT WAN line card: Table 3 Cisco uBR10-SRP- OC12SML DPT WAN Line Card Specifications Description Specifications Product order numbers WAN Card • UBR-SRP-OC12SML= Slot cover for WAN card • ESR-LC-COVER= Card dimensions • Height: 16 in. (40.64 cm) • Width: 2.38 in. (6.045 cm) • Depth: 10.56 in. (26.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Obtaining Documentation Obtaining Documentation The following sections explain how to obtain documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following URL: http://www.cisco.com Translated documentation is available at the following URL: http://www.cisco.com/public/countries_languages.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Obtaining Technical Assistance To submit your comments by mail, use the response card behind the front cover of your document, or write to the following address: Cisco Systems Attn: Document Resource Connection 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Obtaining Technical Assistance • Priority level 2 (P2)—Your production network is severely degraded, affecting significant aspects of business operations. No workaround is available. • Priority level 1 (P1)—Your production network is down, and a critical impact to business operations will occur if service is not restored quickly. No workaround is available.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router Obtaining Technical Assistance This document is to be used in conjunction with the Cisco uBR10012 Universal Broadband Router Hardware Installation Guide.