user manual
Table Of Contents
- Cisco Content Services Switch Routing and Bridging Configuration Guide
- Contents
- Preface
- Configuring Interfaces and Circuits
- Interface and Circuit Overview
- Configuring Interfaces
- Configuring an Interface
- Entering a Description for the Interface
- Configuring Interface Duplex and Speed
- Setting Interface Maximum Idle Time
- Bridging an Interface to a VLAN
- Specifying VLAN Trunking for an Interface
- Configuring Spanning-Tree Bridging for a VLAN or a Trunked Interface
- Configuring Port Fast on an Interface
- Showing Interface Configurations
- Shutting Down an Interface
- Shutting Down All Interfaces
- Restarting an Interface
- Restarting All Interfaces
- Configuring Circuits
- Configuring RIP for an IP Interface
- Configuring the Switched Port Analyzer Feature
- Configuring Spanning-Tree Bridging for the CSS
- CSS Spanning-Tree Bridging Quick Start
- Configuring Spanning-Tree Bridge Aging-Time
- Configuring Spanning-Tree Bridge Forward-Time
- Configuring Spanning-Tree Bridge Hello-Time
- Configuring Spanning-Tree Bridge Max-Age
- Configuring Spanning-Tree Bridge Priority
- Disabling Bridge Spanning-Tree
- Showing Bridge Configurations
- Configuring Open Shortest Path First (OSPF)
- OSPF Overview
- CSS OSPF Configuration Quick Start
- Configuring OSPF on the CSS
- Configuring OSPF on a CSS IP Interface
- Showing OSPF Information
- OSPF Configuration in a Startup-Configuration File
- Configuring the Address Resolution Protocol
- Configuring Routing Information Protocol
- Configuring the Internet Protocol
- IP Configuration Quick Start
- Configuring an IP Route
- Disabling an Implicit Service for the Static Route Next Hop
- Configuring an IP Source Route
- Configuring the IP Record Route
- Configuring Box-to-Box Redundancy
- Configuring IP Equal-Cost Multipath
- Forwarding IP Subnet Broadcast Addressed Frames
- Configuring IP Unconditional Bridging
- Configuring IP Opportunistic Layer 3 Forwarding
- Showing IP Configuration Information
- Configuring the Cisco Discovery Protocol
- Configuring the DHCP Relay Agent
- Index
Chapter 6 Configuring the Internet Protocol
Showing IP Configuration Information
6-18
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Input Segments The total number of segments received, including
those received in error. This count includes segments
received on currently established connections.
Retransmit Segments The total number of segments retransmitted; that is,
the number of TCP segments transmitted containing
one or more previously transmitted octets.
Output Resets The number of TCP segments sent containing the RST
flag.
ICMP Statistics
Echo Requests In The number of received ICMP Echo request messages.
Typically, when the CSS receives the ICMP request,
both the Echo Requests In and the Echo Replies Out
counters increment as a pair for the ICMP request in
and ICMP reply out packets.
Echo Replies In The number of received ICMP Echo reply messages.
Typically, when the CSS receives an ICMP reply, both
the Echo Requests Out and the Echo Replies In
counters increment as a pair for the ICMP reply in and
ICMP request out packets.
Unreachable The number of received ICMP Destination
Unreachable messages.
Redirect The number of received ICMP Redirect messages.
Router Solicit The number of received ICMP router solicitation
packets.
Param Problem The number of received ICMP Parameter Problem
messages.
Timestamp Reply The number of sent ICMP Timestamp Reply
messages.
Information Reply The number of received ICMP information reply
packets.
Mask Reply The number of received ICMP Address Mask Reply
messages.
Table 6-5 Field Descriptions for the show ip statistics Command (continued)
Field Description