user manual
Table Of Contents
- Cisco Content Services Switch Routing and Bridging Configuration Guide
- Contents
- Preface
- Configuring Interfaces and Circuits
- Interface and Circuit Overview
- Configuring Interfaces
- Configuring an Interface
- Entering a Description for the Interface
- Configuring Interface Duplex and Speed
- Setting Interface Maximum Idle Time
- Bridging an Interface to a VLAN
- Specifying VLAN Trunking for an Interface
- Configuring Spanning-Tree Bridging for a VLAN or a Trunked Interface
- Configuring Port Fast on an Interface
- Showing Interface Configurations
- Shutting Down an Interface
- Shutting Down All Interfaces
- Restarting an Interface
- Restarting All Interfaces
- Configuring Circuits
- Configuring RIP for an IP Interface
- Configuring the Switched Port Analyzer Feature
- Configuring Spanning-Tree Bridging for the CSS
- CSS Spanning-Tree Bridging Quick Start
- Configuring Spanning-Tree Bridge Aging-Time
- Configuring Spanning-Tree Bridge Forward-Time
- Configuring Spanning-Tree Bridge Hello-Time
- Configuring Spanning-Tree Bridge Max-Age
- Configuring Spanning-Tree Bridge Priority
- Disabling Bridge Spanning-Tree
- Showing Bridge Configurations
- Configuring Open Shortest Path First (OSPF)
- OSPF Overview
- CSS OSPF Configuration Quick Start
- Configuring OSPF on the CSS
- Configuring OSPF on a CSS IP Interface
- Showing OSPF Information
- OSPF Configuration in a Startup-Configuration File
- Configuring the Address Resolution Protocol
- Configuring Routing Information Protocol
- Configuring the Internet Protocol
- IP Configuration Quick Start
- Configuring an IP Route
- Disabling an Implicit Service for the Static Route Next Hop
- Configuring an IP Source Route
- Configuring the IP Record Route
- Configuring Box-to-Box Redundancy
- Configuring IP Equal-Cost Multipath
- Forwarding IP Subnet Broadcast Addressed Frames
- Configuring IP Unconditional Bridging
- Configuring IP Opportunistic Layer 3 Forwarding
- Showing IP Configuration Information
- Configuring the Cisco Discovery Protocol
- Configuring the DHCP Relay Agent
- Index
6-17
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Chapter 6 Configuring the Internet Protocol
Showing IP Configuration Information
TCP Statistics
Retransmit Algorithm The algorithm used to determine the timeout value for
retransmitting unacknowledged octets.
Max Retransmit Time The maximum value permitted by a TCP
implementation for the retransmission timeout,
measured in milliseconds.
Active Opens The number of times TCP connections have made a
direct transition to the SYN-SENT state from the
Closed state.
Failed Attempts The number of times TCP connections have made a
direct transition to the Closed state from either the
SYN-SENT state or the SYN-RCVD state, plus the
number of times TCP connections have made a direct
transition to the Listen state from the SYN-RCVD
state.
Established Conns The number of TCP connections for which the current
state is either Established or Close-Wait.
Output Segments The total number of segments sent, including those on
current connections but excluding those containing
only retransmitted octets.
Input Errors The total number of segments received in error (for
example, bad TCP checksums).
Min Retransmit Time The minimum value permitted by a TCP
implementation for the retransmission timeout,
measured in milliseconds.
Max TCP Connections The total number of TCP connections that the CSS
supports.
Passive Opens The number of times TCP connections have made a
direct transition to the SYN-RCVD state from the
LISTEN state.
Resets The number of times TCP connections have made a
direct transition to the CLOSED state from either the
ESTABLISHED state or the CLOSE-WAIT state.
Table 6-5 Field Descriptions for the show ip statistics Command (continued)
Field Description