user manual

Index
IN-5
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
OL-7677-04
SFP modules (continued)
DWDM
1-7
installation 2-17 to 2-18
shelf-mounting 2-16
short-circuit protection warning 2-3 to 2-4, C-7
Simple Network Management Protocol
See SNMP
SNMP network management platforms
1-14
software switch management 1-14
spare or replacement DC connectors C-2
specifications A-1 to A-3
speed, troubleshooting 3-4
stacking chassis warning 2-1
straight-through cable pinout
four twisted-pair 1000BASE-T ports
B-6
two twisted-pair 10/100 ports B-5
SunNet Manager 1-14
switch models illustrated 1-3
switch powering on 2-5, D-2
system LED 1-10
T
table-mounting 2-16
technical specifications A-1 to A-3
telco racks 2-6
Telnet, and accessing the CLI 1-14
temperature, operating A-1 to A-3
terminal emulation software D-1
trained and qualified personnel warning 2-3
troubleshooting
bad or damaged cable
3-2
connection problems 3-2
diagnosing problems 3-1
Ethernet and fiber-optic cables 3-2
link status 3-2
ping end device 3-3
port and interface settings 3-3
POST 3-1
spanning-tree loops 3-3
speed, duplex, and autonegotiation 3-4
switch performance 3-4
with LEDs 3-1 to 3-2
troubleshooting spanning-tree loops 3-3
U
user-serviceable parts warning 2-3
W
wall-mounting 2-14
wall-mounting warning 2-2, 2-15
warnings
Class 1 laser
2-2
connections outside the building 2-3
DC power C-1
defined viii
disconnect device C-9
disposal of product 2-3
electrical code compliance 2-3
ground conductor 2-2, C-2
ground connection 2-3, C-2
installation 2-1, C-8
jewelry removal 2-1
lightning activity 2-2
multiple power supply 2-3
no user-serviceable parts 2-3
overcurrent protection 2-4
overheating 2-3
plug-socket combination 2-2
power source 2-2
rack-mounting 2-2
restricted access area 2-2, C-1
shield Ethernet cables 2-2
short-circuit (overcurrent) protection 2-4, C-7
short-circuit protection 2-3 to 2-4