user manual
2-19
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 2 Switch Installation
Installing the Switch
Figure 2-15 Wall-Mounting the Cisco IE-3010-16S-8PC
After the switch is mounted on the wall:
• Wire the switch to a power source. See Chapter 3, “Power Supply Installation.”
• For configuration instructions about using the CLI setup program, go to Appendix C, “Configuring
the Switch with the CLI Setup Program.”
• Connect the switch ports. See the “Connecting Devices to the Ethernet Ports” section on page 2-25.
Cisco
Switch 2500 Series
Connected Grid
207557
1