user manual

2-4
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 2 Installing and Configuring Cisco HSI Software
Installing the Cisco HSI
The Cisco HSI application is distributed as a tar file (with filename GoldWing-xxxx.tar in which xxxx is
the version ID, for example, GoldWing-4.1.tar) or as a CD-ROM.
The default installation directory is /opt/GoldWing. We recommend that you install the software at the
default location. More than one version of the software can exist within subdirectories, for example
/opt/GoldWing/4.1
Links point to the currently active version of the Cisco HSI application, as follows:
• currentPM points to the current version to use for all software except the call processing application.
• currentGW points to the version that may not be the latest version of the call processing application.
(GWmain)
Table 2-3 shows the subdirectories of the /opt/GoldWing/currentPM directory.
Exported provisioning files are stored in /opt/GoldWing/export.
Hardware platform
Installation location
1. VSC = virtual switch controller
2. DNS = domain name system
3. PGW = PSTN Gateway
Table 2-2 Cisco HSI Installation Information (continued)
Required Information Notes
Ta b l e 2-3 CurrentPM Subdirectories
Subdirectory Contents
./bin All compiled executables.
./local All scripts.
./etc Base configuration files.
./lib Shared libraries required by executables.
./toolkit Toolkit files.
./var Volatile directory that contains file locks and so on.
./var/log Default log directory.
./var/prov Provision system writes provisioning config files here.
./var/trace Trace logs are written here.