user manual

A-28

Cisco H.323 Signaling Interface User Guide

OL-4806-01 Rev. A14

Appendix A MML User Interface and Command Reference

rtrv-gapping

The rtrv-gapping command retrieves information about overload-triggered call gapping.

The following information displays:

• The active or inactive status of call gapping

• The percentage of calls that are gapped

• The type of calls to which gapping is applied

rtrv-gapping

Syntax Description

Examples The following MML command retrieves the current levels of call gapping for all gapping clients:

gw mml> rtrv-gapping

Related Commands

rtrv-log

The rtrv-log command displays the logging level of a package or all packages.

rtrv-log:package=x

rtrv-log:all

Syntax Description

This command has no arguments or keywords

Client Name Direction Level Call Type Active

Overload Outgoing 10 Normal No

Overload Incoming 10 Normal No

MML Outgoing 20 All Yes

MML Incoming 30 All Yes

Command Description

set-gapping Sets the type of calls to be gapped.

package=x Displays the logging level for the various packages that make up the

Cisco

HSI.

For package names, see the “Log Message Packages” section on page 4-10.

all Displays the logging levels of all packages.