user manual

A-27

Cisco H.323 Signaling Interface User Guide

OL-4806-01 Rev. A14

Appendix A MML User Interface and Command Reference

rtrv-dest

The rtrv-dest command retrieves status information about the IP links and EISUP signalling path to the

PGW 2200.

The output produced by this command shows the states of the H323 signalling gateway external

interfaces to the PGW 2200s:

• IS: In Service

• OOS: Out Of Service

• MAN: Manual

• REM: Remote

• FLT: Fault

• NCFG: Not Configured

Examples The MML command in the following example retrieves status information about the IP links and EISUP

signalling path to the PGW 2200:

gw mml> rtrv-dest

H323 Signalling Gateway Thu Aug 23 01:15:32 2007

M SUCC

VscA: ACT

ipLink1toVscA: IS

ipLink2toVscA: OOS NCFG

VscB: OOS NCFG

ipLink1toVscB: OOS NCFG

ipLink2toVscB: OOS NCFG

EisupPath: IS

gw mml>

Related Commands Command Description

set-dest-state Changes the service state of an IP link or E-ISUP signaling path to in

service (IS) or out of service (OOS).