user manual

A-16

Cisco H.323 Signaling Interface User Guide

OL-4806-01 Rev. A14

Appendix A MML User Interface and Command Reference

prov-ed

The prov-ed command modifies a provisioned component.

prov-ed:name=MML name,param name=param value,...

Note Enter only those parameters that must be modified.

Syntax Description

Usage Guidelines To change more than one parameter, enter additional param name=value descriptions on the command

line. See

Chapter 3, “Provisioning the Cisco HSI,” for a list of MML names, parameter names, and their

associated values.

Examples Use the MML command shown in the following example to edit a provisioning element with the MML

name ras, parameter name maxFail, and value 7:

gw mml> prov-ed:name=ras,maxfail=7

H323 Signaling Interface Sun Jan 7 15:22:02 2001

M SUCC

Successfully edited provisioning element(s):

MML Name : ras.

Parameter: maxFail.

Value : 7.

prov-rtrv Retrieves information about an existing provisioning session.

prov-sta Establishes a provisioning session.

prov-stp Terminates either a specified provisioning session or the current

provisioning session.

Command Description

MML name MML name for the element you are modifying. Valid MML names are:

• sys_config_static

• sys_config_dynamic

• h323_sys

• ras

• h245

• q931

param name The name of a valid configuration parameter for the specified name.

param value The value you want to assign to the parameter.