user manual

A-14
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
prov-cpy
prov-cpy
The prov-cpy command activates the current provisioning session. If any client-level parsing fails
during the prov-cpy command, the system might prompt for confirmation to force the HSI to activate
the configuration (prov-cpy[:confirm]). However, we recommend that you never use prov-cpy:confirm
unless you are asked to do so by Cisco.
If client-level parsing fails, there is a severe error within the user configuration.
If the prov-cpy command fails, use the failure description and the configuration changes to determine
the error. Correct the configuration and reissue the prov-cpy command.
Please contact the Cisco TAC if you require assistance with the configuration.
Syntax Description
Examples The command shown in the following example copies the configuration changes from the current session
to the Cisco HSI:
gw mml> prov-cpy
H323 Signaling Interface Sun Jan 7 13:53:42 2001
M SUCC
Successfully activated the provisioning session.
Usage Guidelines See Chapter 3, “Provisioning the Cisco HSI,” for a list of MML names, parameter names, and their
associated values.
Related Commands
confirm If any client level parsing fails during the data session, a confirm is needed
for the data to be activated.
Command Description
prov-add Adds a component.
prov-dlt Deletes a provisioned component.
prov-ed Modifies a provisioned component.
prov-exp Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
prov-rtrv Retrieves information about an existing provisioning session.
prov-sta Establishes a provisioning session.
prov-stp Terminates either a specified provisioning session or the current
provisioning session.