user manual

A-13
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
prov-add
prov-add
The prov-add command adds a component to the Cisco HSI.
prov-add:name=MML name,param name=param value,...
Syntax Description
Usage Guidelines To define more than one parameter, enter additional param name=param value descriptions on the
command line. See
Chapter 3, “Provisioning the Cisco HSI,” for the list of MML names, parameter
names, and their associated values.
Examples The command shown in the following example adds a provisioning element with the MML name ras,
parameter name maxFail, and value 3:
gw mml> prov-add:name=ras,maxfail=3
H323 Signaling Interface Sun Jan 7 15:15:02 2001
M SUCC
Successfully added provisioning element(s):
MML Name : ras.
Parameter: maxFail.
Value : 3.
Related Commands
MML name MML name for the element you are adding. Valid MML names are:
• sys_config_static
• sys_config_dynamic
• h323_sys
• ras
• h245
• q931
param name The name of a valid configuration parameter for the specified name.
param value The value you want to assign to the parameter.
Command Description
prov-cpy Activates the configuration settings in the current provisioning
session.
prov-dlt Deletes a provisioned component.
prov-ed Modifies a provisioned component.
prov-exp Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
prov-rtrv Retrieves information about an existing provisioning session.
prov-sta Establishes a provisioning session.
prov-stp Terminates either a specified provisioning session or the current
provisioning session.