user manual

A-9
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
clr-alm
clr-alm
The clr-alm command clears an alarm event.
clr-alm:event=alarm event
Syntax Description
Usage Guidelines The alarm category must match the format shown in the alarm when the rtrv-alms command displays
it. It is case sensitive.
Examples This example clears the alarm event VSC_FAILURE.
gw mml> clr-alm:event=VSC_FAILURE
GW Signaling Interface 2000-12-05 14:19:22
M SUCC
mml>
Related Commands
clr-meas
The clr-meas command resets a measurement counter.
clr-meas:counter group:name=measurement name
clr-meas:counter group
Syntax Description
alarm event The alarm event name or the text that appears in the body of the alarm.
Alarm names are defined in
Chapter 5, “Troubleshooting Cisco HSI
Alarms.”
Command Description
ack-alm Acknowledges that an alarm event is recognized but does not clear the
alarm.
rtrv-alms Displays all active alarms
counter group Valid counter groups are:
• RAS
• Q931
• H245
measurement name For a list of measurement names, see Table 4-1, Table 4-2, and Table 4-3.