user manual

A-8
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
ack-alm
• stp-call
• stp-callproc
• stp-softw
• stp-trc
ack-alm
The ack-alm command acknowledges that an alarm event is recognized but does not clear the alarm.
ack-alm:event=alarm event
Syntax Description
Usage Guidelines The format of the alarm category name must be the same as the format of the alarm category name that
the rtrv-alms command displays. It is case sensitive.
Examples This example recognizes the VSC_FAILURE alarm event is recognized, but the alarm is not cleared:
gw mml> ack-alm:event=VSC_FAILURE
GW Signaling Interface 2000-12-05 14:19:22
M SUCC
mml>
Related Commands
alarm event The alarm category or the text that appears in the body of the alarm. Alarm
event names are defined in
Chapter 5, “Troubleshooting Cisco HSI
Alarms.”
Command Description
clr-alm Clears an alarm event
rtrv-alms Displays all active alarms