user manual

Step 9
Click OK.
Step 10
Click Finish to complete the wizard.
What to Do Next
• (Optional) Add additional blocks of IQN suffixes to the IQN pool.
• Include the IQN suffix pool in a service profile and/or template.
Adding a Block to an IQN Pool
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
On the SAN tab, expand SAN > Pools.
Step 3
Expand the node for the organization containing the pool.
If the system does not include multitenancy, expand the root node.
Step 4
Expand the IQN Pools node.
Step 5
Right-click the desired IQN pool and select Create a Block of IQN Suffixes.
Step 6
In the Create a Block of IQN Suffixes dialog box, fill in the following fields:
DescriptionName
The suffix for this bock of iSCSI Qualified Names (IQNs).
Enter from 1 to 64 characters. You can use any letter or number, as well
as the special characters . (period), : (colon), and - (hyphen). For
example, you could use alphadc-1.
Suffix field
The first suffix number in the block.From field
The number of suffixes in the pool.Size field
Step 7
Click OK.
Deleting a Block from an IQN Pool
If you delete an address block from a pool, Cisco UCS Manager does not reallocate any addresses in that
block that have been assigned to vNICs or vHBAs. All assigned addresses from a deleted block remain with
the vNIC or vHBA to which they are assigned until one of the following occurs:
• The associated service profiles are deleted.
• The vNIC or vHBA to which the address is assigned is deleted.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 463
iSCSI Boot