User manual
Table Of Contents
- Cisco Video Surveillance 2621 IP Dome User Guide
- Contents
- Preface
- Overview
- Getting Started
- Configuring and Managing the IP Camera
- Viewing Live Video
- Troubleshooting
- Using the IP Camera with Cisco VSM
- Index
4-7
Cisco Video Surveillance System 2621 IP Dome User Guide
OL-24129-02
Chapter 4 Viewing Live Video
Viewing Video through Third-Party Devices or Software
• To access the MJPEG stream with video only, enter this command:
rtsp://ip_address/img/jpgvideo.sav
Accessing Dual Streams (MPEG-4 + MJPEG)
In the following commands, the ip_address argument represents the IP address of the IP camera. After
you enter the command, enter your IP camera user name and password when prompted.
• To access the MPEG-4 stream with video and audio, enter this command:
rtsp://ip_address/img/media.sav
• To access the MPEG-4 stream with video only, enter this command:
rtsp://ip_address/img/video.sav
• To access the MJPEG stream with video and audio, enter this command:
rtsp://ip_address/img/jpgmedia.sav
• To access the MJPEG stream with video only, enter this command:
rtsp://ip_address/img/jpgvideo.sav