Router Installation and Configuration Guide

7-12
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
OL-16478-02
Chapter 7 Basic Cisco SCE8000 Platform Operations
How to Display the SCE Platform Inventory
How to Display the SCE Platform Inventory
Unique Device Identification (UDI) is a Cisco baseline feature that is supported by all Cisco platforms.
This feature allows network administrators to remotely manage the assets in their network by tracing
specific devices through either CLI or SNMP. The user can display inventory information for a remote
device via either:
Entity MIB (see ENTITY-MIB in the Cisco Service Control Engine (SCE) Software Configuration
Guide)
CLI show inventory command
This command displays the UDIs only for field replaceable units (FRU).
CLI show inventory raw command.
This command displays all UDIs on the Cisco SCE8000 platform.
The show inventory CLI commands display the following information:
Device name
Description
Product identifier
Version identifier
Serial number
Step 1 From the SCE> prompt, type show inventory [raw] and press Enter.
Examples for Displaying the SCE Platform Inventory
Displaying the SCE Platform Inventory: FRUs Only, page 7-12
Displaying the Complete SCE Platform Inventory, page 7-13
Displaying the SCE Platform Inventory: FRUs Only
The following example shows how to display the inventory (UDIs) for the FRUs only.
SCE>show inventory
NAME: "SCE8000 Chassis", DESCR: "CISCO7604"
PID: CISCO7604 , VID: V0 , SN: FOX105108X5
NAME: "SCE8000 Service Control Module (SCM) in slot 1", DESCR: "SCE8000-SCM-E"
PID: SCE8000-SCM-E , VID: V0 , SN: CAT1122584N
NAME: "SCE8000 SPA Interface Processor (SIP) in slot 3", DESCR: "SCE8000-SIP"
PID: SCE8000-SIP , VID: V0 , SN: CAT1150G07F
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2 , VID: V02, SN: JAE11517RMR
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2 , VID: V02, SN: JAE11496E1P
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2 , VID: V02, SN: JAE11517RIO