Network Router User Manual

13-21
Cisco 7304 Router Modular Services Card and Shared Port Adapter Software Configuration Guide
OL-4807-02
Chapter 13 Configuring the 2-Port and 4-Port T3/E3 SPAs
Configuration Examples
! Specify the cable length
!
Router(config-if)# cablelength 200
Invert Data Configuration Example
The following example enables invert data:
! Enter global configuration mode
!
Router# configure terminal
!
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 4/1/3
!
! Enable invert data
!
Router(config-if)# invert data
Trace Trail Buffer Configuration Example
The following example configures the TTB attributes:
! Enter global configuration mode
!
Router# configure terminal
!
! Specify the serial interface and enter interface configuration mode
!
Router(config)# interface serial 4/1/3
!
! Specify the TTB attributes
!
Router(config-if)# ttb country ab
Router(config-if)# ttb soperator 56
Router(config-if)# ttb snode 34
Router(config-if)# ttb rnode cd
Router(config-if)# ttb x 7
Router(config-if)# ttb serial 12