Network Router User Manual

2-13

Cisco 806 Router Hardware Installation Guide

78-10432-01

Chapter 2 Installation

Mounting Your Router

You can mount your router on one of the following surfaces:

• Table or other horizontal surface

• Wall or other vertical surface

Mounting on Table

Do not cover or obstruct router vents, which are located on the router sides.

To hub, server, PC,

or workstation

COMPUTERS 4,

COMPUTERS RXD, and

COMPUTERS TXD

• COMPUTERS 4 is on when the Ethernet port

is physically connected to a hub, PC, or

workstation.

• COMPUTERS RXD blinks when an Ethernet

port receives an Ethernet packet.

• COMPUTERS TXD blinks when an Ethernet

port sends an Ethernet packet.

To broadband

modem or Ethernet

switch

INTERNET 1, INTERNET

RXD, AND INTERNET

TXD

• INTERNET 1 is on when the INTERNET

ETHERNET port is physically connected to

a broadband modem or Ethernet switch.

• INTERNET RXD blinks when the

INTERNET ETHERNET port receives an

Ethernet packet.

• INTERNET TXD blinks when the

INTERNET ETHERNET port sends an

Ethernet packet.

Table 2-2 Verifying Installation (continued)

Power/Link LEDs to Check Normal Patterns