Router Installation and Configuration Guide

Index
IN-5
Cisco 7204 Installation and Configuration Guide
OL-5101-02
P
password, enable and enable secret 4-1
physical description
field-replaceable units
fan tray
1-20
Flash memory cards 1-22
Flash memory disks 1-22
I/O controller 1-11
network processing engine 1-6
port and service adapters 1-17
power supplies 1-18
pinouts
MII port on I/O controller
3-17
RJ-45 port on I/O controller 3-18
port adapters
filler
2-9
handling 2-3, 6-4
logical interface numbering 1-23
physical description 1-17
slot numbering 1-2, 1-23
subsystem for troubleshooting 5-7
power
connections
3-20
cord 1-18, 2-1, 5-5
DC status 1-27
emergency switch 2-3
site requirements 2-4
subsystem, for troubleshooting 5-3
surge suppression 2-5
ungrounded 2-3
power factor corrector, power supply 2-4
power supply
and environmental monitor
1-27
description 1-4
disabled 1-27
filler 2-9
LEDs 1-18, 5-3
physical description 1-18
power factor corrector 2-4
shutdown 1-27
troubleshooting 5-3
privileged command level 4-1
problem solving, subsystem 5-3
procedures
checking the shipping container
2-13
configuring the Cisco 7204 4-2
connecting I/O controller cables 3-13
connecting port adapter cables 3-13
connecting power 3-20
copying images between Flash memory cards 6-11
copying images to a Flash memory card 6-9
formatting a new Flash memory card 6-8
grounding the chassis 3-11
installing and removing a Flash memory card 6-7
installing brackets on the chassis 3-5
installing chassis on a tabletop (general
installation)
3-9
rack-mounting chassis 3-1
replacing a port adapter 6-3
replacing a service adapter 6-3
replacing or recovering a lost password 6-13
starting the Cisco 7204 3-23
viewing your system configuration 6-1
processor
shutdown
1-27
system for troubleshooting 5-3
R
rack-mount installation 3-1
rack-mount kit
hardware
2-13
installation 3-1
radio frequency interference
See RFI
2-5
replacing a port adapter 6-3
replacing a service adapter 6-3