Router Quick Start Guide

8
Mount the Chassis in the Rack
Install the Hardware
53487
POWER
A
POWER
B
Caution Two people are required to
perform this step.
Step 1 With a person positioned at either side of
the chassis, grasp the bottom edge of the
chassis with one hand near the front and
the other near the back.
Step 2 Slowly lift the chassis in unison. Avoid
sudden twists or moves to prevent injury.
Step 3 With the chassis positioned so the front is
closest to the rack, insert the front of the
chassisintotherackbetweenthebrackets,
and then slowly lower the chassis until it
rests on the two bracket ledges.
Step 4 Slide the chassis back into the rack along
the ledges until the ears meet the front
mounting posts on both sides of the rack.
Step 5 Secure each earto the rack-mountingpost
with two 10-32 x 5/8-inch LG Phillips
pan-head screws.