Network Router User Manual

7-9
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17372-01
Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the Remote-Access Scenario
Step 4 From the drop-down list, enter the subnet mask or click a preconfigured value.
Step 5 Click Next to continue.
Configure Client Attributes
To access your network, each remote access client needs basic network
configuration information, such as which DNS and WINS servers to use and the
default domain name. Rather than configuring each remote client individually,
you can provide the client information to ASDM. The adaptive security appliance
pushes this information to the remote client when a connection is established.
Ensure that you specify the correct values, or remote clients will not be able to use
DNS names for resolution or use Windows networking.