Network Router User Manual

Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the Remote-Access Scenario
7-6
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17372-01
Step 2 Specify the type of authentication that you want to use by performing one of the
following steps:
• To use static preshared keys for authentication, click Pre-Shared Key, and
enter a key (such as "CisCo").
• To use digital certificates for authentication, click Certificate, click the
Certificate Signing Algorithm (rsa-sig/dsa-sig) from the drop-down list, and
then click a pre-configured trustpoint name from the drop-down list.
Step 3 Click Next to continue.
Specify a User Authentication Method
Users can be authenticated either by a local authentication database or by using
external authentication, authorization, and accounting (AAA) servers (RADIUS,
TACACS+, SDI, NT, and Crabbers).
In Step 4 of the VPN Wizard, perform the following steps:
Step 1 Click the appropriate radio button to specify the type of user authentication that
you want to use:
• A local authentication database
• An external AAA server group
Step 2 Click a preconfigured server group from the drop-down list, or click New to add
a new server group.