Network Router User Manual

Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the Remote-Access Scenario
7-4
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17372-01
Step 3 In Step 1 of the VPN Wizard, perform the following steps:
a. Click the Remote Access VPN option.
b. From the drop-down list, click outside as the enabled interface for the
incoming VPN tunnels.
c. Click Next to continue.
Select VPN Clients
In Step 2 of the VPN Wizard, perform the following steps:
Step 1 Click the radio button to allow remote access users to connect to the adaptive
security appliance
using either a Cisco VPN client or any other Easy VPN remote
products.