Network Router User Manual

7-13
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17372-01
Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the Remote-Access Scenario
In Step 10 of the VPN Wizard, perform the following steps:
Step 1 Specify hosts, groups and networks that should be in the list of internal resources
made accessible to authenticated remote users. To add or remove hosts, groups
and networks dynamically from the Selected panel, click Add or Delete, as
appropriate.
Note Enable split tunneling by clicking the radio button at the bottom of the
screen. Split tunneling allows traffic outside the configured networks
to be sent out directly to the Internet instead of over the encrypted
VPN tunnel.
Step 2 When you have finished specifying resources to expose to remote clients, click
Next to continue.