Network Router User Manual

5/26/05 Troubleshooting Tips
OL-7426-03
Client Status CodesClient Status Codes
The Client Status code may be any of the following:
Using Cisco 1000 Series Lightweight Access Point LEDsUsing Cisco 1000 Series Lightweight Access Point LEDs
Table - Client Status Code Descriptions and Meanings
Client
Status
Code
Description Meaning
0 idle normal operation -- no rejections of client associ-
ation requests
1 aaaPending completing an aaa transaction
2 authenticated 802.11 authentication completed
3 associated 802.11 association completed
4 powersave client in powersave mode
5 disassociated 802.11 disassociation completed
6 tobedeleted to be deleted after disassociation
7 probing client not associated or authorized yet
8 disabled automatically disabled by Operating System for an
operator-defined time
Table - Cisco 1000 Series Lightweight Access Point LED Conditions and Status
LED Conditions
Status
Power Alarm 2.4 GHz 5 GHz
Green ON off on or off on or off
Cisco Wireless LAN Controller found, code OK,
normal status.
Green ON off Yellow ON on or off 802.11b/g Activity.
Green ON off on or off Amber ON 802.11a Activity.
off Red ON off off
Cisco 1000 Series lightweight access point
starting up.
All LEDs cycle back and forth
Cisco 1000 Series lightweight access point
searching for Cisco Wireless LAN Controller.
Stops after Cisco Wireless LAN Controller and
DHCP server found.
All LEDs blink on and off together
Cisco Wireless LAN Controller found, code
upgrade in process.