Network Router User Manual

5/26/05 Updating the Linux Cisco WCS
OL-7426-03
Uninstall the Old Cisco WCS Server Application
• Enter ./uninstallAirespaceControlSystem to uninstall the Cisco WCS application.
• Click Yes to continue with the uninstallation.
• Click Finished when the uninstallation is completed.
Restore the Cisco WCS Server Database
• Navigate to the default /opt/WCS30 directory (or the directory chosen during installation).
• Enter ./Restore to start the Cisco WCS database backup. The Backup script displays the
Select Backup directory window.
• In the Select Backup directory window, navigate to the NAME of the backup directory you
created above (not IN the directory), and click OK.
• When the Backup script displays You may restart the Cisco WCS Server now, click OK.
Start the Cisco WCS Server Application
• In the /opt/WCS30 directory (or the directory chosen during installation).
• Enter ./StartWCS to start the Cisco WCS application.
• Enter ./CheckServerStatus to open the Wireless Control System Server Status window.
• When the Start Wireless Control System Server Status window displays Wireless Control
System Server is up. Please connect your clients (Cisco WCS User Interfaces) using Http
Port: 80 or Https Port: 433
(or whichever HTTP: or HTTPS: port you selected in the Install the
New Cisco WCS Server Application step), Cisco WCS has started and is ready to host Cisco WCS
User Interfaces.
CAUTION: When you plan to shut down Cisco WCS, refer to Starting and Stopping
Linux Cisco WCS.